Post by cdibbs in Anyone used this with Snapmaker 2?

PixelCNC Has Moved: deftware.org » Community

Viewing post in Anyone used this with Snapmaker 2?

For anyone else using the SM 2.0 with the 200 watt CNC and bracing kit: I was able to get great results while going much faster by using 1/4 inch bits rather than the included 1/8th inch (had to order a 1/4 inch ER11 collet from Amazon). With 0.5mm and 1/32" diameter tapered ball ends, I was able to get up to about 68 in/min (single-pass, full 1/8" depth, roughing pass unnecessary) before the quality dropped off on some bamboo cutting boards. Time was maybe 1.5 hours.

Also, Charlie, I emailed you a bug report with some SVG attachments but hadn't heard back yet so I am concerned it may have gone to your spam folder. Please let me know if you didn't get it. Thanks!

Deftware5 days ago

Hi Chris,

That looks like it came out great! 1.5 hours isn't bad at all, that's about what I would expect for something like this with such a fine bit, if not a bit longer (~2 hours).

I only see our email exchange from April 17th, nothing in the spam! Could you try re-sending? :]

- Charlie

cdibbs3 days ago(+1)

Hey, I re-sent it at 4:09pm about two days ago, just FYI. No rush on my end but just wanted to confirm. The attachment was a zip file this time instead of SVGs in case that makes any difference to your email filters.

Deftware2 days ago

Hi Chris,

It looks like we had a problem with our email servers for the last few weeks that were causing some emails to get stuck! Thanks for the headsup. I have some catching up to do on emails now so look for my reply :]

- Charlie

itch.io

Viewing post in Anyone used this with Snapmaker 2?