FYI, with a Turnigy 9X on Mac with Wireless 9 in1 Simulator Adapter (http://www.hobbyking.com/hobbyking/store/__52145__...) works fine set up like this:
1) USB to SIM box does NOT requiere (or work with) a Rx - just connect red SIM box via USB to computer the only way possible
2) set SIM box switch to "Wire", and connect audio cable from SIM box to Tx - REMOVE Tx module from Tx (or place some paper behind it and tape in place!)
3) I've found 3 of the 4 program switch positions work, with various levels of additional channels also working depending on the switch & the program your using (crrcsim, heli-x, fpv freerider) you can get between 4 and 6 channels working (remember to set up in the Tx first!!).
Excellent SIM, my only problem is GPU (and therefore battery) use - even on worst res, temp and fan speed shoot up to max on start up, whilst Crrcsim (admittedly a more basic sim) does nothing at all to temp and battery life - I'd be prepared to sacrifice some (a lot?) GPU power to be able to use the laptop more than 1 hour with FPV Freerider! With Crrcsim it's like I'm not even using a SIM, GPU is almost unused, lasts almost 7 hours instead of 1!!.
Cheers!
Andy
:-)
PD WTF! After downloading the full version, I tried the SIM on best GPU, and the heat has gone? Not sure yet if more problem of the Demo, but the machine no longer heats up so much ;-)