Post by Bilbofett in Help! 14 hours for a 48 second clip! Something is very wrong

Viewing post in Help! 14 hours for a 48 second clip! Something is very wrong

a GeForce RTX 2060? And you get 18 frames an HOUR? I'm getting 205 frames/hour.. so it should've taken 6 hours, not 14...

and here's how to get your CUDA version: "NVidia control panel' > 'Help' > 'System Information' and click on the 'components' tab":

FreshmoeBaymin4 years ago

Thank you so much. I'm going to see what the hell is.

FreshmoeBaymin4 years ago

My information is same as yours, but I don't know why it is tooooooo slow. I have no idea about this problem.

FreshmoeBaymin4 years ago (1 edit)

This is my settings, what about yours

Bilbofett4 years ago

I did not choose "Interpolation 4x";.. I chose "Interpolation 2x", going from 25fps to 50fps. Section size on mine was 200, padding was 80. I can probably increase those, but I get "Out of Memory" in Split-frames mode if I leave the defaults to 500/200, even with a 6gb card.

I noticed you're going from 23.976 (24fps) fps to 95.. then telling DAIN to go back down to 60?? Why? You should probably just go for "Interpolation 2x" to get 47.952‬ (48fps), or even manually set the final frame rate to 59/94 (60fps).

I am guessing the 4x interpolation (instead of 2x) and forcing DAIN to convert from 95fps to 60fps is why yours is taking so long.

I wonder if we had CUDA version 9 (that they used to test) and a Pascal (not Turing) based graphics card, if it would work faster. I also wonder about virtual memory, input resolutions, different imported codecs supported, etc. There's too many variables.

FreshmoeBaymin4 years ago

Well, because I make MAD video and I hope the video can 60 fps. I learn the way from a website video uploader and his 2080 Ti works well. Or MAYBE I should interpolation 2x and select 'create 60 fps verion of movie' ? However , TONIGHT I well try to use your way and wish me render faster. LOLS

DrAutissimo4 years ago

I have a 2080 Super, and I get a frame roughly every 10 seconds. The stitching in the end takes way longer however. I got a 3 second clip in roughly 2 hours, the frames were already done after like 10 minutes tho.

FreshmoeBaymin4 years ago

And this is the result that it has run 25mins , yep, just 7 frames.

Bilbofett4 years ago

"tried to allocate 384.00 MiB, 4.32 GiB already allocated; 26.63 MiB free"

on a 6GB card.. it only needed 384 MiB.. only 4.32G was used out of the 6.. so 1.68G should still be usable, and it only asked for 384Mb....... but it says only 26Mb free.. ???????

6G-4.32G= 1.68G, not 26mb.

DiverBlue864 years ago (2 edits)

ow dude you are making anime opening too ? so do i , im doing a 1 minites and 30 second dororo first op1 and i get 2161 frame. I can get maybe 5 minutes per frame .... can i boost up my process speed? (1day 288frame and i got 2161 frame to go ... )(i5-7400)(16GB Ram)(GTX1050TI4GB)

DiverBlue864 years ago

FreshmoeBaymin4 years ago

well, maybe 4 gigs memories is quite small for this project. Or it will be very slow.

FreshmoeBaymin4 years ago

The number of section size and padding is very important.

DiverBlue864 years ago

Yep it is too less. But i already figure out my best setting 335/150 for section size / section padding and it give me 15 second per frame .

DiverBlue864 years ago

And i'm still finding the best amout for my GPU , hope i can get better amout for better performance.

itch.io

Viewing post in Help! 14 hours for a 48 second clip! Something is very wrong