Post by GilDev in Getting your controller connected

Viewing post in Getting your controller connected

Hi,

I saw other people got my problem. I run macOS 12.10.5 and my Taranis Q X7, although being recognized by macOS and usable with other apps where you can choose which controller you want to use, is not recognized in FPV FreeRider at all. Circles don't move and I have no idea what to do. My Turnigy-i6s works fine in comparison.

Do you know what is going on? Thanks!

FPV Freerider7 years ago

Usually the Taranis should be plug and play on macOS. Make sure you don't have any other controllers/joysticks/tablets connected, that might cause a conflict. Also, if you have installed some kind of custom USB driver such as USB overdrive, that might be something worth looking into.

GilDev7 years ago

Nothing else is plugged in and no custom USB driver is installed. I'll try with other Mac, but it's really weird considering it works flawlessly with a Turnigy i6s.

Deleted post7 years ago

Deleted 6 years ago

GilDev7 years ago

Hey,

Everything works with my Turnigy i6s so the set up is good, and you don't really need a USB dongle with Taranis radios because of the mini-USB port, it's automatically recognized as an HID device. It's detected by my Mac and works great with other software asking you which input controller you want to use (crrcsim for example). Freerider just doesn't seem to want to choose it, it's weird…

itch.io

Viewing post in Getting your controller connected